2084-9008 SIMPLEX, PHONE ARMOR BREAK-ROD SRFC MNT.

2084-9008 Simplex, Firefighter telephone systems provide two-way communications for facilities where radio communications may not be available or are unreliable. They are typically used during active firefighting conditions, during a fire alarm investigation, or during fire alarm system inspection and test. Operation requires a dedicated two-wire circuit, typically using twisted, shielded pair wiring (TSP) to minimize electrical noise pickup from adjacent wiring. Depending on the master control, up to 6 remote phones and the master can be in simultaneous use. Additional information can be found in Installation Instructions 579-226 and on data sheet S4100-0034 which describes 4100ES Master phone control operation.

Firefighter telephones provide direct communications with the Firefighter Telephone

Control’s master phone:

  • When remote phones call the master, a call tone is provided to verify that the request is in process (exact performance may vary depending on master phone equipment).
  • Two-wire telephone circuits are supervised and power-limited.
  • Compatible with 4100ES and 4100U Series, and legacy 4100/4120 Series Simplex® Firefighter Telephone Controls.

Phone assemblies are available for:

  • Surface or flush mounting, (NOTE: backbox is ordered separately).
  • Or as separate phone sets for plugging into dedicated remote phone jack stations.

UL Listed to Standard 864

Pague com
  • Mercado Pago
  • Mercado Pago
  • proxy-paypal-express-checkout
Selos

CMC COMÉRCIO E IMPORTAÇÕES DE MATERIAL ELÉTRICO - CNPJ: 32.641.478/0001-97 © Todos os direitos reservados. 2024


Para continuar, informe seu e-mail