2099-9103 SIMPLEX PULL STATION BREAK GLASS IN/O.

Activation of the Simplex single action manual stations requires a firm downward pull to activate the alarm switch. Completing the action breaks an internal plastic break-rod (visible below the pull lever, use is optional). The use of a break-rod can be a deterrent to vandalism without interfering with the minimum pull requirements needed for easy activation. The pull lever latches into the alarm position and remains extended out of the housing to provide a visible indication.

Note: This Simplex Pull Station does not come with the key. The key must be purchased separately, see here.

Double Action Stations

Require the operator to strike the front mounted hammer to break the glass and expose the recessed pull lever. The pull lever then operates as a single action station.

Manual fire alarm stations for general purpose applications:

  • Operation complies with ADA requirements
  • Pull lever protrudes when alarmed
  • Break-rod is supplied (use is optional)
  • Screw terminals for wiring connections
  • Tamper resistant reset key lock (keyed same as Simplex® fire alarm cabinets)

Station Reset

Requires the use of a key to reset the manual station lever and deactivate the alarm switch. If the break-rod is used, it must be replaced.

Testing

Requires physical activation of the pull lever.

Institutional Stations activate by key operation only allowing access for manual alarms to be initiated by authorized personnel. Operation requires key insertion and opening of the station cover.

Produtos relacionados

Pague com
  • Mercado Pago
  • Mercado Pago
  • proxy-paypal-express-checkout
Selos

CMC COMÉRCIO E IMPORTAÇÕES DE MATERIAL ELÉTRICO - CNPJ: 32.641.478/0001-97 © Todos os direitos reservados. 2024


Para continuar, informe seu e-mail