4906-9230 SIMPLEX

4906-9230 SIMPLEX, MC TRUEALERT A/V CEILING MT WHT.

4906-9230 Simplex, Multi-Candela TrueAlert addressable A/Vs provide convenient installation to standard electrical boxes. Operation is individually addressed and individually controlled with power, supervision, and control supplied from a Simplex fire alarm control panel providing IDNAC Signaling Line Circuits (SLCs).

Strobe Application Reference
Proper selection of visible notification is dependent on occupancy, location, local codes, and proper applications of: the National Fire Alarm and Signaling Code (NFPA 72), ANSI A117.1; the appropriate model building code: BOCA, ICBO, or SBCCI; and the application guidelines of the Americans with Disabilities Act (ADA).

IDNAC SLC Operation Advantage
TrueAlert A/V Addressable Appliances on IDNAC SLCs provide audible and visible notification using a single two-wire circuit that also confirms connection to the individual notification appliance’s electronic circuit. This operation increases circuit supervision integrity by providing supervision that extends beyond the appliance wiring connections.

Individually addressed and controlled multi-candela A/V (audible/visible) notification appliances provide:

• Multi-candela xenon strobe with synchronized 1 Hz flash rate and with intensity programmable from the control panel or jumper selected as 15, 30, 75, or 110 cd.
• Advanced addressable notification controlled by IDNAC SLCs providing regulated 29 VDC allowing strobes to operate with lower current even under battery backup.
• Wiring supervision to each strobe allowing “T-tapped” connections for Class B circuits to simplify wiring (Class A circuits require in/out wiring).
• TrueAlert Device Reports at the control panel detailing appliance point ID, custom label, type, and candela setting.
• Magnet test diagnostics to assist checkout and testing of appliances and wiring.
• Compatibility with ADA requirements.
• Compatibility with legacy TrueAlert addressable systems for upgrade and replacement.
• Strobe operation listed to UL Standard 1971 and ULC Standard S526.
• Horn operation listed to UL Standard 464 and ULC Standard S525.