XP6-R NOTIFIER, RELAY CONTROL MODULE.

XP6-R Notifier six-relay control module provides an intelligent fire alarm system with six Form-C relays.

The first module is addressed from 01 to 154 while the remaining modules are automatically assigned to the next five higher addresses. Provisions are included for disabling a maximum of three unused modules. A single isolated set of dry relay contacts is provided for each module address, which is capable of being wired for either a normally-open or normally-closed operation. The module allows the control panel to switch these contacts on command. No supervision is provided for the controlled circuit.

  • Six addressable Form-C relay contacts
  • Removable 12 AWG (3.25 mm²) to 18 AWG (0.9 mm²) plug-in terminal blocks
  • Status indicators for each point
  • Unused addresses may be disabled
  • Rotary address switches
  • FlashScan® or CLIP operation
  • Mount one or two modules in a BB-XP cabinet (optional)
  • Mount up to six modules on a CHS-6 chassis in a CAB-3 Series, CAB-4 Series, EQ Series, or BB-25 cabinet (optional)
  • Mounting hardware included

Each XP6-R module has panel-controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.

Standby current: 1.45 mA (SLC current draw with all addresses used; if some addresses are disabled, the standby current decreases)

Datasheet XP6-R Notifier.

See all our parts for Notifier.

Produtos relacionados

Pague com
  • Mercado Pago
  • Mercado Pago
  • proxy-paypal-express-checkout
Selos

CMC COMÉRCIO E IMPORTAÇÕES DE MATERIAL ELÉTRICO - CNPJ: 32.641.478/0001-97 © Todos os direitos reservados. 2024


Para continuar, informe seu e-mail